Insulation nails are special anchors for exterior wall insulation, consisting of galvanized screws, nylon expansion tubes, and fixed discs. According to the thickness of the insulation layer, it is divided into various specifications. Widely used in building decoration. The insulation nails produced by our factory are widely used in the insulation layer of houses. It has the characteristics of anti-aging, resistance to sudden temperature changes, anti-corrosion, cold and heat resistance; high bearing capacity, high-pressure bearing, good tensile properties; not easy to deform after loading, moisture-proof, vibration damping, noise absorption, and good insulation. Easy to install, just hammer, no special installation tools required. Galvanized screws solve the corrosion problem very well, have good durability, and the heat transfer performance of nylon material is low; there is no cold bridge in winter, and it is efficient and energy-saving.
Insulation nails can make the insulation layer in the exterior wall insulation system particularly effective: high compressive strength, which can prevent impact damage, low thermal conductivity, which can reduce the thickness of the entire wall structure; good dimensional stability, no deformation under temperature changes, can prevent surface coating cracks, while providing a flat surface for wall decoration, and serving as the base layer of cement coating. There are many specifications and materials for insulation nails. The use of materials is mainly determined according to different regions and different climates. The specifications used are also determined based on the thickness of the insulation layer. The installation quantity is determined according to the height of the floor.
Generally, the number of insulation nails used for building insulation is determined based on the area of the insulation layer and the height of the floor. Generally, 6-8 are used per square meter for floors below 10 floors, and 8-10 are used for floors 10 to 20. If there are more than 20 layers, more than 10 will be used. Therefore, if you clearly know the height of the floor and the area that needs to be insulated, you can easily calculate how many insulation nails are needed for this insulation project.
