Home>Products >Fiberglass Chopped Strands

Fiberglass Chopped Strands

Fiberglass chopped strands Features

Increase toughness

Concrete reinforcement material to increase the toughness of concrete mortar, etc.

Used in concrete

It has good dispersion in concrete and can be used in concrete with good dispersion and strong holding power.

Good bearing capacity

Crack reduction product for use in concrete to overcome the low tensile strength of concrete.

Good adaptability

Used in cement, concrete, mortar, etc.;

Used in construction, roads and bridges, hydraulic engineering, etc. to reduce costs.

Product Properties

1. Good bundle integrity

Good integrity ensures that the chopped strands will not fluff into balls during long-distance transportation, which is conducive to the feeding process and will not block the mixer feeder.

2. Good liquidity

Good fluidity is closely related to bundle integrity, which also creates favorable conditions for the smooth progress of the automatic feeding process.

3. Excellent physical and chemical properties

The friction material glass fiber chopped strands have high tensile strength, elastic modulus, and high-temperature resistance, so they can strengthen thermosetting plastics and improve their impact, tensile, compression and bending, wear resistance, and high strength resistance. Temperature characteristics to improve dimensional stability and minimize deformation at high temperatures.

Competitive advantage

Fiberglass Chopped Strands are suitable for dam slope protection, airport runways, and desert prevention and control.

Reinforcement materials for internal and external wall insulation systems.

Corrosion-resistant chemical pipelines or storage tanks.

Insulation board or flat plate.

Decorative panels, bathtubs, cable boxes, water tanks, etc.

Transportation and construction industry.

The difference between glass fiber chopped filament and long fiber

With the continuous development of the times, the related glass fiber production industry is also constantly improving, and the derivative products of related glass fiber are also constantly innovating and improving. High-quality short fiberglass is very popular in the modern market, and fiberglass filament yarn is no exception. Short glass fibers and long glass fibers have different application fields and play different roles in different fields. The properties of short and long glass fibers are different. The short fiberglass supplied by the best short fiberglass company in the industry is well received. So, what is the difference between easy-to-use short and long fibers?

1. The physical length is different

There is a high demand for good quality short fiberglass, as is long fiberglass. The physical length of staple fibers is usually less than 6 mm, or even between 0.2 mm and 0.6 mm; while the physical length of long glass fibers is in the range of six mm to twenty-five mm. The easy-to-use short glass fiber will increase the repurchase rate of customers, and the relevant short glass fiber manufacturers that have been well received will also increase the output of short glass fiber to ensure the needs of customers. Of course, better short fiberglass is usually more popular with customers.

2. The production process is different

The production process of the well-received short glass fiber is different from that of long glass fiber. Good quality glass staple fiber in the production process, the size should not be too long, but because of this feature, the easy-to-use 15-ounce chopped precursor is more flexible in production, and quality and yield are very good; In the production process of long glass fiber, the fluidity of the material is required to be good, and the surface of the glass fiber should be activated, and the phenomenon of glass fiber peeling and leakage should not occur. The production process of short and long glass fibers is different, resulting in different application fields.

Prospects for glass fiber chopped precursors

With the continuous development of science and technology, the application field of glass fiber chopped precursor is becoming more and more extensive. In the construction sector, fiberglass chopped precursors are used as reinforcements for concrete, gypsum board, and other building materials. In the field of transportation, glass fiber chopped precursors are used as reinforcing materials for composite materials, and also as sound insulation materials for automobiles, trains, and airplanes. In the energy sector, glass fiber chopped filaments are used as thermal insulation materials for pipes, boilers, and turbines.

In addition, with the continuous improvement of the production technology of glass fiber chopped precursor, the quality of glass fiber chopped precursor has been continuously improved, and the cost has gradually decreased. This will further promote the application of glass fiber chopped precursors in various fields. In the future, chopped glass fiber will continue to play an important role in various industries and contribute to the sustainable development of human society.

Glass fiber chopped precursor is a reinforcing material made of glass fibers with excellent mechanical properties, chemical resistance, and heat resistance. With the continuous development of science and technology, the application field of glass fiber chopped precursor is becoming more and more extensive, and its production technology and quality are also constantly improving. In the future, glass fiber chopped precursor will continue to play an important role in various industries and contribute to the sustainable development of human society.

Instructions

- Mix resin and hardener or catalyst

- Next, add your short strands

- It's best to use a paint stirrer on your power drill to ensure all strands are properly saturated.

Thicker layers and larger pouring areas can generate too much heat, so proceed with caution.

Storage

Glass fiber chopped strands for BMC need to be stored in a dry, cool place. The suitable temperature is between 15°C and 35°C. Relative humidity is 35% to 65%. If you are storing strands at lower temperatures, move the product to the production area 24 hours in advance. You can store the pallets one by one, but you'll need to place a piece of plywood between the two to protect the packaging.

Read before use:

Warning:

Dry powder materials can generate electrostatic charges. Proper precautions must be taken when flammable liquids are present.

Causes eye irritation, is harmful if inhaled, and may cause skin irritation. Harmful if swallowed. Avoid contact with eyes and skin. Please wear goggles and a face shield when operating. Always wear an approved respirator. Use only adequate ventilation. Keep away from heat, sparks, and flames. Store and use the handle in a way that minimizes dust generation.

First aid:

In case of contact with skin, wash with warm water and soap. In case of contact with eyes, rinse immediately with water for 15 minutes. If irritation persists, seek medical attention. If inhaled, move to fresh air. If you have trouble breathing, seek medical attention immediately

Note:

The container can be dangerous when empty. Empty containers contain product residues.

FAQ

Q1: Application areas of Fiberglass chopped strands

A: (1) The impact of crack initiation and propagation of glass fiber reinforced fluorine concrete. Improve the impermeability of concrete. Improve the frost resistance of concrete. Improve the resistance and toughness of concrete. Improve the durability of concrete.

(2) Glass fiber connects cement lines, gypsum boards, glass fiber-reinforced plastics, composite materials, electrical appliances, and other products construction projects, which can be reinforced, crack-resistant, wear-resistant, and solid.

(3) Fiberglass connects reservoirs, roof panels, swimming pools, corruption pools, and sewage treatment tanks to improve their service life.

Q2: What are the characteristics of Fiberglass chopped strands?

A: 1. Moderate moisture content, good fluidity, and even distribution in the finished product.

2. Fast wetting, high mechanical strength of the finished product, and best cost performance.

3. Good bundling: ensure that the product does not lint or pill during transportation.

4. Good dispersion: Good dispersion enables the fiber to be evenly dispersed when mixed with cement mortar.

5. Excellent physical and chemical properties: can significantly improve the strength of cement products.

Q3: What are the filaments in fiberglass made of?

A: Fiberglass is formed when filaments of silica-based or other formulated glass are extruded into many small-diameter fibers suitable for textile processing.

Q4: How are fiberglass strands made?

A: In the process of forming the fibers into wool fiberglass mats (a process known in the industry as "forming"), the fiberglass fibers are made from molten glass, and a chemical adhesive is sprayed onto the fibers as they are formed. The adhesive is a thermosetting resin that holds the fiberglass together.

Q5: What are the uses of glass fiber strands?

A: These fibers are used to produce thermoplastic and thermoset composites with high-strength textiles, soundproofing, dustproofing, and electrically insulating properties. Fiberglass chopped strands offer a variety of advantages in terms of insulation, productivity, and strength.

Q6: What do glass fiber strands look like?

A: The fibers of fiberglass are light yellow or white. However, their tiny size makes them difficult to see on clothing or skin.

Q7: How to clean fiberglass strands?

A: A vacuum cleaner equipped with a HEPA filter can effectively remove particles as small as 0.3 microns, including any remaining fiberglass. If necessary, don't hesitate to vacuum the area multiple times to make sure all fiberglass is removed from the bed and bedroom.

Q8: What is the AR glass fiber chopped strand?

A: AR glass fiber chopped strands can also be used to enhance inorganic fibers with excellent impermeability and crack resistance properties in mortars. They are also a highly competitive product that can replace polyester fiber and lignin fiber-reinforced mortars. They can also improve the high-temperature stability of asphalt. Concrete resistance, low-temperature crack resistance, and fatigue resistance extend the service life of the pavement.

Q9: Competitive advantages of alkali-resistant glass fiber chopped strands

A: a. High-temperature stability, low-temperature crack resistance

b. Fatigue resistance

c. Extend road life

d. Corrosion resistance

e. Wear-resistant and electrically insulating

Q10: How to save?

A: Fiberglass Chopped Strands should be stored in a dry, cool place. The best conditions are temperature between 15-35℃ and relative humidity between 30%-70%. Please keep the product in its original packaging to avoid moisture before use.

As one of the leading fiberglass chopped strands manufacturers and suppliers in China, we warmly welcome you to buy high-grade fiberglass chopped strands for sale here from our factory. All products are with high quality and low price. Contact us for quotation and free sample.

Chopped Glass, CUTTING SILK FIBERGLASS, Fiberglass Self Adhesive Tape