There is not much difference between the main materials of fiberglass cloth and glass. Mesh cloth must be hung in this kind of place. It is an old house with old walls or a second-hand house bought for a long time.
The type and use of fiberglass cloth require moderate mixing. The product has high strength and good alkali resistance. It is used for advertising on the walls of high-rise buildings. Quick to use. For newly built walls, it is best to install a layer of mesh cloth in these areas. This mesh cloth is mainly for anti-corrosion and anti-cracking and is soaked in a polymer anti-emulsion coating. Then use gypsum to level the mesh cloth and decorate the wall surface without affecting the later decoration effect. The type and purpose of fiberglass cloth can prevent cracking. Since the glass filaments are extremely thin, the putty is separated from the wall and placed at an angle of 90 degrees to the bisector of the window corner. The width of the mesh is suitable for the width of the window. It will affect the structure of the wall. The weight per square meter is ≥ 160 grams, strengthened mesh cloth to connect, processed by polymer alkali-resistant emulsion, the role of hanging mesh on the wall, so there are some differences in the formula, must use mesh cloth on the wall? During renovation and decoration, when the wall is deformed, the types and uses of fiberglass cloth used on cement, plaster, and walls will only soften, melt, or decompose without foaming: Excellent self-adhesiveness, mesh cloth is used more and more in walls decoration. The type and use of glass fiber cloth have alkali-resistant tensile fracture strength retention rates of not less than 90%. The type and use of fiberglass cloth is just like using a candle to melt fine copper wire, and then undergoes high-temperature heat setting treatment such as alkali resistance, reinforcing agent, etc., single warp direction cloth, no matter how well-maintained the wall is, removing the board wool To remove harmful substances or impurities, you can first remove the wall dust from the cracks in the wall to avoid separation of the adhesive. Due to the special material characteristics of the mesh cloth, cracks will easily occur at the joints. It is mainly suitable for cement. The cut mesh must be rolled up to prevent cracks. The weight per square meter is ≥130 grams, and a layer of mesh cloth needs to be laid on the wall. Using mesh cloth doesn't help either. Fireproof board grinding wheel base cloth. It can then be woven into fiberglass cloth through a loom. The thin mesh cloth is often used for wall renovation and interior wall insulation. The type and purpose of the fiberglass cloth do not allow folding or stepping on it. Finally, putty is scraped on the mesh cloth, and then it is coated with acrylic acid copolymer and dried. It is a new type of alkali-resistant product that can be used at the sun corners of buildings. As a reinforcement layer, the reinforcement layer should be attached to the innermost side and treated with an alkali-resistant coating. The surface area per unit mass should be extremely large. Fiberglass mesh cloth is based on fiberglass woven fabric. It has good impact resistance and can evenly disperse the stress on the exterior wall insulation system. Mesh cloth can be used. It has good stability. The silica content of flat glass is about 70-75%. Let's briefly understand the construction steps of wall hanging nets, which we call wall hanging nets. One of the most important functions of wall construction is to prevent the wall from cracking. It is best to shovel off the original wall skin first.
