1. For the first floor of the building, door and window openings, decorative joints, yin and yang corners and other parts, an additional layer of alkali-resistant mesh cloth should be laid, and a layer of anti-cracking mortar should be applied.
2. The lap length of ordinary alkali-resistant mesh cloth should not be less than 100mm, and the reinforced alkali-resistant mesh cloth is only butted, not lapped.
3. The width of each side of the alkali-resistant mesh cloth at the yin and yang corners should not be less than 20mm.
4. The alkali-resistant mesh cloth around the openings of doors and windows should be pulled out of the wall 100mm, and a layer of 400mmX30mm alkali-resistant mesh cloth should be laid on the four corners along the direction of 45°.
