Fiberglass mesh is a fiberglass product with a brittle texture and is easy to deform, so special attention should be paid when loading and unloading.
Issues to note when loading and unloading.
There are generally two types of mesh cloth: diaper mesh cloth and the other is latex mesh cloth. The roll of diaper mesh cloth is relatively fluffy, while the latex mesh cloth is relatively solid. The former is easier to deform, while the latter is not easy to deform. The latex mesh cloth is easy to form into an ellipse or other shape after loading and unloading. Although the quality is different, the issues to be noted are the same. After the product is produced, it should be placed horizontally on the ground. Each layer should be placed differently. For example, the first layer should be placed horizontally, and the second layer should be placed vertically. This is a more solid placement. It should be handled with care and not placed directly on the ground vertically. For heavier products, if it is inconvenient to place them horizontally, only one layer can be placed vertically, and it cannot be placed on top. When it arrives at the logistics, it must be stacked, mainly for the convenience of counting the quantity. In addition, it is not allowed to use a rope to tighten it. A piece of wood should be placed on the product on the side, so that it is not easy to deform.
