Exterior wall insulation mesh cloth can be specifically divided according to the holes, and different holes correspond to different product types.
1. 2.5mm to 3mm holes. These products weigh less than 70 grams. They are made of golden pot yarn and alkali-resistant emulsion. They are mainly used for interior walls, mosaics, marble cladding, or self-adhesive tape production.
2. 4mm holes, product weight is divided into two ends: 65g, 75g, 80g, 90g gold pot series for interior wall use and 150g, 160g products for exterior wall use. Styling is done with an alkali-resistant emulsion.
3. 5mm eyelet, products are concentrated between 100g and 140g. In addition, enhanced series products such as 300g can only be made into 5mm eyelets. This is limited by various reasons such as machine, product weight, warp, and weft yarn thickness, etc.
4.6mm holes. There is only one kind of product: 80g trolley cloth, which is woven using small machinery. The product has larger holes but the lowest cost. It can be used on interior and exterior walls. It is the most commonly used type in southern my country.
5. 10mm eyelet, this is the large eye series in the conventional sense. The weight of the product is between 100g and 120g. It can be used for the construction of marble, Roman columns, etc.
6. There is only one type of 1cm hole, that is, the flue series with edges wrapped in the width direction. The width is available in different specifications such as 60CM, 100CM, 120CM, etc., for the construction of flue ducts, Roman columns, etc.
