It can avoid the deformation of the entire insulation structure caused by the collision and extrusion of external impact. The application of the grid is more related to the advertising industry, the construction is simple and the stability is very good. The current national technical standard for external wall insulation ( JG149-2003): The alkali-resistant tensile breaking strength of the glass fiber mesh in both the warp and weft directions shall not be less than 750N/50mm.
Make a reinforcing layer at the sun corner of the building to strengthen the connection between the grid cloth. The alkali-resistant tensile breaking strength of JG158-2004 glass fiber mesh in the warp and weft directions shall not be less than 1250N/50mm. When used on cement, gypsum, and walls, the alkali-resistant tensile breaking strength retention rate shall not be less than 90%. Fiberglass cloth is made by drawing glass into extremely fine glass strands. Today's wall decoration techniques are rich, and cracks will also occur, which we call wall hanging nets. Waterproof membrane cloth and asphalt roof waterproofing play the role of soft steel bars in the insulation system. It is a new building material for exterior wall insulation projects. New wall hanging net: There is no leveling layer on the surface of the new wall. The electronic-grade glass fiber cloth is stirred moderately. The broken fibers will cause greater irritation to the skin. Then it is coated with acrylic A new type of alkali-resistant product made by drying acid copolymer. The width of electronic-grade glass fiber cloth is suitable for window width standards. It can be widely used for interior and exterior wall insulation, waterproofing, fire prevention, and crack resistance, etc. of buildings. With a weight of ≥160 grams per square meter, mesh cloth has become a must-use building material.
Single weft fabric. Then use cement mortar to make a leveling layer. After that, the mesh cloth is directly pasted on the wall. The areas involved are used for advertising on the walls of high-rise buildings. Due to their crack resistance and other characteristics, a layer of mesh cloth needs to be laid on the wall. Main performance: excellent alkali resistance, then leveled with gypsum on the mesh cloth. The effect is better) hang directly under the leveling layer. Electronic grade fiberglass cloth), non-foaming: excellent self-adhesiveness, electronic grade fiberglass cloth mesh should be cut in a clean and flat place. Therefore, the temperature resistance has decreased, and generally, it needs to be maintained for more than a month. The mesh cloth is woven with medium-alkali or alkali-free glass fiber yarn. Wall mesh is a new type of wall crack-resistant and thermal insulation material. Use a stirrer or other tools to stir the adhesive. After being used for a long time, it is not easy to shrink and deform and has good positioning. If you want to make the wall mesh more durable, the EPS board surface should be kept dry, just like using a candle to melt thin copper wire. Fiberglass mesh cloth is based on fiberglass woven fabric. To strengthen.
You can use mesh cloth, and cracks will easily occur at the seams.
