1. Hanging the vertical line to make an ash cake
According to the thickness of the insulation layer required by the design, the ash cake is made by hanging the vertical line to ensure the thickness of the insulation layer and the smoothness of the surface. Then spray the wall interface agent.
2. Insulation layer construction
Paint the insulation material in stages, the thickness of which should not exceed 10MM each time, until the design thickness is reached, and then scrape it with an aluminum alloy scraper after one pass.
3. Anti-cracking mortar with grid cloth
First, fill a batch of anti-cracking mortar on the insulation layer, then use a spatula to press the mesh cloth into the mortar, wait for the previous mortar to dry, and then fill up the mortar again to ensure that the surface is smooth.
4. Paste facing bricks
Mix the matching tile adhesive in proportion, and mix evenly, then apply it on the back of the tile, and then paste it on the wall, add water to the jointing agent in proportion, mix it evenly, and then joint.
