Process flow of glass fiber waste processing system
1. The system consists of processes such as cleaning, crushing, washing, drying, and transportation
2. Glass fiber waste wire cleaning, waste paper tube, iron wire, nuts and other debris, cutting wire, metal detected by metal detector.
3. Glass fiber waste passing through the crusher inlet requires the installation of a roller to control the feed rate. The product consists of 5mm short fibers and powder, with finer particle size. After drying, it undergoes secondary crushing and is equipped with an air separation device.
4. After washing the glass fiber waste fibers with water, the wetting agent attached to the fibers is washed away. The water used to wash the waste fibers can be treated with water from a sewage treatment plant, with minimal or no use of tap water. The washed water is then returned to the sewage treatment station for further treatment. The washed fibers are initially separated from water by a sand water separator.
5. The glass fiber waste is dried and sent to the dryer for continuous drying by the elevator. The hoist has a variable frequency speed regulation function, and the feeding speed affects the moisture content of the dried product. The energy sources for dryers include natural gas, steam drying, and using hot air from kilns for drying. The moisture content of the dried fibers is less than 1%.
After the treatment of glass fiber waste fibers, the twisted glass rope can be called the "king of ropes". After the treatment of glass fiber waste fibers, various types of glass fabrics can be woven through the organization, such as glass cloth, which can be used as filter cloth in chemical factories. Glass fiber waste has a wide range of uses. Actively seeking the utilization value of glass fiber waste can bring certain economic benefits and reduce public pollution and pollution to society. It can be said that killing two birds with one stone.
Fiberglass waste can bring huge wealth to your business.
